]> This manual is for GNU Gengetopt(version 2.21, 28 July 2007),a tool to write command line option parsers for C programs.Copyright © 2001 - 2007 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, with the Front-Cover Texts being “A GNU Manual,” and with the Back-Cover Texts as in (a) below. A copy of the license is included in the section entitled “GNU Free Documentation License.” (a) The FSF's Back-Cover Text is: “You have freedom to copy and modify this GNU Manual, like GNU software. Copies published by the Free Software Foundation raise funds for GNU development.” Gengetopt Gengetopt is a tool to write command line option parsing code for C programs. This is Edition 2.21 of the Gengetopt manual. This file documents GNU Gengetopt version 2.21. This manual is for GNU Gengetopt (version 2.21, 28 July 2007), a tool to write command line option parsers for C programs. Copyright © 2001 - 2007 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, with the Front-Cover Texts being “A GNU Manual,” and with the Back-Cover Texts as in (a) below. A copy of the license is included in the section entitled “GNU Free Documentation License.” (a) The FSF's Back-Cover Text is: “You have freedom to copy and modify this GNU Manual, like GNU software. Copies published by the Free Software Foundation raise funds for GNU development.” Audience Audience Who should use Gengetopt Gengetopt is a tool to generate C code to parse the command line arguments argc and argv that are part of every C or C++ program. The generated code uses the C library function getopt_long to perform the actual command line parsing. This manual is written for C and C++ programmers, specifically the lazy ones. If you've written any non-trivial C program, you've had to deal with argument parsing. It isn't particularly difficult, nor is it particularly exciting. It is one of the classic programming nuisances, which is why most books on programming leave it as an exercise for the reader. Gengetopt can save you from this work, leaving you free to focus on the interesting parts of your program. Thus your program will be able to handle command line options such as: myprog --input foo.c -o foo.o --no-tabs -i 100 *.class And both long options (those that start with --) and short options (start with - and consist of only one character) can be handled (see for further details). For standards about short and long options you may want to take a look at the GNU Coding Standards (http://www.gnu.org/prep/standards_toc.html). Gengetopt can also generate a function to save the command line options into a file (see ), and a function to read the command line options from a file (see ). Of course, these two kinds of files are compliant. Generated code works also if you use GNU Autoconf and GNU Automake and it is documented with Doxygen comments. Gengetopt Copying Conditions Copying conditions Conditions for copying Gengetopt Gengetopt is free software; you are free to use, share and modify it under the terms of the GNU General Public License that accompanies this manual. The code that Gengetopt generates is also free software; however it is licensed with a simple all-permissive license instead of the GPL or LGPL. You are free to do anything you like with the generated code, including incorporating it into or linking it with proprietary software. Gengetopt was originally written by Roberto Arturo Tena Sanchez. It is currently maintained by Lorenzo Bettini http://www.lorenzobettini.it. A primordial version of was written by Adam Greenblatt. Installation installation download See the file INSTALL for detailed building and installation instructions; anyway if you're used to compiling Linux software that comes with sources you may simply follow the usual procedure, i.e. untar the file you downloaded in a directory and then: cd <source code main directory> ./configure make make install Note: unless you specify a different install directory by --prefix option of configure (e.g. ./configure --prefix=<your home>), you must be root to run make install. Files will be installed in the following directories: executables /prefix/bin docs /prefix/share/doc/gengetopt examples /prefix/share/doc/gengetopt/examples additional files /prefix/share/gengetopt Default value for prefix is /usr/local but you may change it with --prefix option to configure. Download download You can download it from GNU's ftp site: ftp://ftp.gnu.org/gnu/gengetopt or from one of its mirrors (see http://www.gnu.org/prep/ftp.html). I do not distribute Windows binaries anymore; since, they can be easily built by using Cygnus C/C++ compiler, available at http://www.cygwin.com. However, if you don't feel like downloading such compiler, you can request such binaries directly to me, by e-mail (find my e-mail at my home page) and I can send them to you. Archives are digitally signed by me (Lorenzo Bettini) with GNU gpg (http://www.gnupg.org). My GPG public key can be found at my home page (http://www.lorenzobettini.it). You can also get the patches, if they are available for a particular release (see below for patching from a previous version). Anonymous CVS Access CVS This project's CVS repository can be checked out through anonymous (pserver) CVS with the following instruction: cvs -z3 -d:pserver:anonymous@cvs.savannah.gnu.org:/sources/gengetopt co gengetopt Further instructions can be found at the address: http://savannah.gnu.org/projects/gengetopt. Please notice that this way you will get the latest development sources of Gengetopt, which may also be unstable. This solution is the best if you intend to correct/extend this program: you should send me patches against the latest cvs repository sources. If, on the contrary, you want to get the sources of a given release, through cvs, say, e.g., version X.Y.Z, you must specify the tag rel_X_Y_Z when you run the cvs command or the cvs update command. NOTICE: This convention holds since release 2.14. When you compile the sources that you get through the cvs repository, before running the configure and make commands, you should, at least the first time, run the command: autogen.sh sh autogen.sh This will bootstrap the autotools in the correct order, and also copy possibly missing files. You should have installed recent versions of automake autoconf libtool automake, autoconf and libtool in order for this to succeed. You will also need flex and bison. What you need to build gengetopt requirements Gengetopt has been developed under GNU/Linux, using gcc (C++), and bison (yacc) and flex (lex), and ported under Win32 with Cygnus C/C++compiler, available at http://www.cygwin.com. For developing gengetopt, I use the excellent automake autoconf libtool GNU Autoconfhttp://www.gnu.org/software/autoconf, GNU Automakehttp://www.gnu.org/software/automake and GNU Libtoolhttp://www.gnu.org/software/libtool. gnulib Since version 2.19 I also started to use Gnulib - The GNU Portability Libraryhttp://www.gnu.org/software/gnulib, “a central location for common GNU code, intended to be shared among GNU packages” (for instance, I rely on Gnulib for checking for the presence and correctness of getopt_long function, ). Moreover GNU Gengen (http://www.gnu.org/software/gengen) is used for automatically generating the code that generates the command line parser. Actually, you don't need all these tools above to build gengetopt because I provide generated sources, unless you want to develop gengetopt. The code generated by gengetopt relies on the getopt_long function that is usually in the standard C library; however, there may be some implementations of the C library that don't include it; we refer to , for instructions on how to check whether getopt_long is part of the library and how to deal with their lacking (using autoconf and automake). Patching from a previous version patching If you downloaded a patch, say gengetopt-1.3-1.3.1-patch.gz (i.e., the patch to go from version 1.3 to version 1.3.1), cd to the directory with sources from the previous version (gengetopt-1.3) and type: gunzip -cd ../gengetopt-1.3-1.3.1.patch.gz | patch -p1 and restart the compilation process (if you had already run configure a simple make should do). Basic Usage how to use Gengetopt getting started with Gengetopt tutorial The command line options, which have to be handled by gengetopt generated function, are specified in a file (typically with .ggo extension). This file consist in lines of sentences with the formats shown below. Commands in {} are optional (the option sentences need not to be given in separate lines): package "<packname>" version "<version>" purpose "<purpose>" usage "<usage>" description "<description>" args "<command line options>" option <long> <short> "<desc>" {argtype} {typestr="<type descr>"} {values="<value1>","<value2>",...} {default="<default value>"} {dependon="<other option>"} {required} {argoptional} {multiple} {hidden} option <long> <short> <desc> flag <on/off> section "section name" {sectiondesc="optional section description"} text "a textual sentence" Where: package packageThis has the precedence over PACKAGE generated by autoconf.Optional. version versionThis has the precedence over VERSION generated by autoconf.Optional. purpose purposeWhat the program does (even on more than one line), it will be printedwith the help, before the usage string. Optional. usage usageThe “Usage” string that will be printed with the help Sinceversion 2.19. . If not specified, it will be generated automatically.Optional. description descriptionThe “Description” string that will be printed with thehelp Since version 2.19. , after the usage string. Optional. args argsWith args Since version 2.18 you can specify optionsthat will be added to the command line options of gengetopt itself. Forinstance, if you always run gengetopt on your input file with theoptions --no-handle-error --string-parser -u, you can add theseoptions in the input file like this: args "--no-handle-error --string-parser -u" and remove those recurrent options from the command line.Optional. long longThe long option, a double quoted string with upper and lower casecharacters, digits, a dash (-) and a dot (.). No spacesallowed. The name of the variables generated to store arguments (seelater in this section) are long options converted to be legal C variablenames. This means that . and - are both replaced by_. short short The short option, a single upper or lower case char, or a digit. Ifa - is specified, then no short option is considered for the longoption (thus long options with no associated short options are allowed). desc desc wrappingThis description will be printed during the output of--help. Wrapping will be automatically performed. argtype argtype string, int, short, long, float,double, longdouble or longlong. If no type isspecified the option does not accept an argument. typestr typestr a description for the type of the values for the option. This will beused during the output of --help (e.g., "filename" insteadof simply STRING, or "portnumber" instead of simplyINT). values values a list of strings containing all the possible values that can be passedto the option. The type is considered string and must not be specified. default default an optional default value for the option. The value must always bespecified as a double quoted string. dependon dependon this option depends on another option (whose long name description isspecified). If this option is given at command line but not the optionit depends on, an error will be generated. required optional --default-optional required required or optional. This specifies whether such optionmust be given at each program invocation. These keywords wereintroduced in release 2.17. Before, you had to use the keywordsyes or no. You can still use these keywords but their useis not advised since they are not much explicative.If not specified, an option is considered mandatory; if you do not wantthis behavior, you can require that by default options are consideredoptional, by using the command line option--default-optional Since version 2.20. . argoptional argoptional If this flag is specified then this option has an argument that isoptional. In this case, when you specify the argument at command line,please use = in case you use a long option, and avoid spaces ifyou use short option. For instance, if the option with optionalargument is -B|--bar, use the following command line syntax:-B15 or --bar=15, and NOT the following one -B 15nor --bar 15.By using this specification together with default you can obtainan option that even if not explicitly specified will have the defaultvalue, and if it is specified without an argument it will have, again,the default value. multiple multiple If this flag is specified then this option can be specified more thanonce at command line; all the values for this option are stored in anarray. You can also specify the number of occurrences that a multipleoption must be specified. Notice that this is independent from therequired flag. See . hidden --full-help hidden If an option is “hidden” it will notappear in the output of --help but it can still be specified atcommand line Since version 2.15. . In case hidden optionsare used, the command line option --full-help will also begenerated. This will print also the hidden options Sinceversion 2.16. . on/off on/off on or off. This is the state of the flag when the programstarts. If user specifies the option, the flag toggles. For strings (delimited by ") the following convention is adoptedThis is true since version 2.19. Before this version, strings were not allowed to spawn more than one line.: a string spanning more than one line will be interpreted with the corresponding line breaks; if the line break is not desired one can use the backslash \ to break the line without inserting a line break. A line break in a string can also be inserted with the string \n. Here are some examples: "This string will be interpreted into two lines exactly as it is" "This string is specified with two lines \ but interpreted as specified in only one line \ i.e., without explicit line break" "This string\nwill have a line break" Moreover, if the character " must be specified in the string, it will have to be escaped with the backslashSince version 2.19.: "This string contains \"a quoted string\" inside" The part that must be provided in the correct order is option <long> <short> "<desc>" while the other specifications can be given in any orderThis holds since version 2.15: in previous versions the option specifications had to be given in a fixed order.. Thus, for instance option <long> <short> "<desc>" {argtype} {typestr="<type descr>"} is the same as option <long> <short> "<desc>" {typestr="<type descr>"} {argtype} Comments begin with # in any place (but in strings) of the line and ends in the end of line. -h,--help -V,--version Notice that the options -h,--help and -V,--version are added automatically; however, if you specify an option yourself that has h as short form or help as long form, then -h,--help is not added (and you have to handle the help option manually). The same holds for -V,--version. --full-help In case hidden options are used, See Hidden options, the command line option --full-help will also be generated. This will print also the hidden optionsSince version 2.16.. section Options can be part of sections, that provide a more meaningful descriptions of the options. A section can be defined with the following syntax (the sectiondesc is optional) and all the options following a section declaration are considered part of that sections: section "section name" {sectiondesc="optional section description"} Notice that the separation in sections is stronger than separation in groups of mutual exclusive options (see ). Furthermore, sections should not be inserted among group options (but only externally). A section makes sense only if it is followed by some options. If you don't specify any option after a section, that section will not be printed at all. If you need to simply insert some text in the output of --help, then you must use text, explained in the next paragraph. text You can insert, among options, a textual string that will be printed in the output of --helpSince version 2.18.: text "\nA text description with possible line\nbreaks" Of course, you can use this mechanism even to manually insert blank lines among options with an empty text string: text "" You can also specify the list of values that can be passed to an option (in that case the option has type string). If a value that is not in the list is passed, an error is raised. You can think of such options as enumerated options. It is not necessary to pass the complete value at the command line option: a non ambiguous prefix will do. For instance, if the accepted values are "foo","bar","foobar", then you can pass at the command line the value "b" and the value "bar" will be selected, or the value "foob" and the value "foobar" will be selected; instead, passing the value "fo" will raise an ambiguity error. Here's an example of such a file (the file is called sample1.ggo) # Name of your program package "sample1" # don't use package if you're using automake # Version of your program version "2.0" # don't use version if you're using automake # Options option "str-opt" s "A string option, for a filename" string typestr="filename" optional text "\nA brief text description" text " before the other options.\n" option "my-opt" m "Another integer option, \ this time the description of the option should be \"quite\" long to \ require wrapping... possibly more than one wrapping :-) \ especially if I\nrequire a line break" int optional option "int-opt" i "A int option" int yes section "more involved options" sectiondesc="the following options\nare more complex" text "" option "flag-opt" - "A flag option" flag off option "funct-opt" F "A function option" optional section "last option section" option "long-opt" - "A long option" long optional option "def-opt" - "A string option with default" string default="Hello" optional option "enum-opt" - "A string option with list of values" values="foo","bar","hello","bye" default="hello" optional option "secret" S "hidden option will not appear in --help" int optional hidden option "dependant" D "option that depends on str-opt" int optional dependon="str-opt" text "\nAn ending text." The simplest way to use gengetopt is to pass this file as the standard input, i.e.: gengetopt < sample1.ggo By default gengetopt generates cmdline.h and cmdline.c. Otherwise we can specify these names with a command line option: gengetopt < sample1.ggo --file-name=cmdline1 --unamed-opts parameter option without name The option --unamed-opts allows the generated command line parser to accept also names, without an option (for instance you can pass a file name without an option in front of it, and also use wildcards, such as *.c, foo*.? and so on). These are also called parameters (see ). You can specify an optional description for these additional names (default is FILES). In cmdline1.h you'll find the generated C struct: /** @file cmdline1.h * @brief The header file for the command line option parser * generated by GNU Gengetopt version 2.21 * http://www.gnu.org/software/gengetopt. * DO NOT modify this file, since it can be overwritten * @author GNU Gengetopt by Lorenzo Bettini */ #ifndef CMDLINE1_H #define CMDLINE1_H /* If we use autoconf. */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #ifdef __cplusplus extern "C" { #endif /* __cplusplus */ #ifndef CMDLINE_PARSER_PACKAGE /** @brief the program name */ #define CMDLINE_PARSER_PACKAGE "sample1" #endif #ifndef CMDLINE_PARSER_VERSION /** @brief the program version */ #define CMDLINE_PARSER_VERSION "2.0" #endif /** @brief Where the command line options are stored */ struct gengetopt _args_info { const char *help_help; /**< @brief Print help and exit help description. */ const char *full_help_help; /**< @brief Print help, including hidden options, and exit help description. */ const char *version_help; /**< @brief Print version and exit help description. */ char * str_opt_arg; /**< @brief A string option, for a filename. */ char * str_opt_orig; /**< @brief A string option, for a filename original value given at command line. */ const char *str_opt_help; /**< @brief A string option, for a filename help description. */ int my_opt_arg; /**< @brief Another integer option, this time the description of the option should be \"quite\" long to require wrapping... possibly more than one wrapping :-) especially if I\nrequire a line break. */ char * my_opt_orig; /**< @brief Another integer option, this time the description of the option should be \"quite\" long to require wrapping... possibly more than one wrapping :-) especially if I\nrequire a line break original value given at command line. */ const char *my_opt_help; /**< @brief Another integer option, this time the description of the option should be \"quite\" long to require wrapping... possibly more than one wrapping :-) especially if I\nrequire a line break help description. */ int int_opt_arg; /**< @brief A int option. */ char * int_opt_orig; /**< @brief A int option original value given at command line. */ const char *int_opt_help; /**< @brief A int option help description. */ int flag_opt_flag; /**< @brief A flag option (default=off). */ const char *flag_opt_help; /**< @brief A flag option help description. */ const char *funct_opt_help; /**< @brief A function option help description. */ long long_opt_arg; /**< @brief A long option. */ char * long_opt_orig; /**< @brief A long option original value given at command line. */ const char *long_opt_help; /**< @brief A long option help description. */ char * def_opt_arg; /**< @brief A string option with default (default='Hello'). */ char * def_opt_orig; /**< @brief A string option with default original value given at command line. */ const char *def_opt_help; /**< @brief A string option with default help description. */ char * enum_opt_arg; /**< @brief A string option with list of values (default='hello'). */ char * enum_opt_orig; /**< @brief A string option with list of values original value given at command line. */ const char *enum_opt_help; /**< @brief A string option with list of values help description. */ int secret_arg; /**< @brief hidden option will not appear in --help. */ char * secret_orig; /**< @brief hidden option will not appear in --help original value given at command line. */ const char *secret_help; /**< @brief hidden option will not appear in --help help description. */ int dependant_arg; /**< @brief option that depends on str-opt. */ char * dependant_orig; /**< @brief option that depends on str-opt original value given at command line. */ const char *dependant_help; /**< @brief option that depends on str-opt help description. */ int help_given ; /**< @brief Whether help was given. */ int full_help_given ; /**< @brief Whether full-help was given. */ int version_given ; /**< @brief Whether version was given. */ int str_opt_given ; /**< @brief Whether str-opt was given. */ int my_opt_given ; /**< @brief Whether my-opt was given. */ int int_opt_given ; /**< @brief Whether int-opt was given. */ int flag_opt_given ; /**< @brief Whether flag-opt was given. */ int funct_opt_given ; /**< @brief Whether funct-opt was given. */ int long_opt_given ; /**< @brief Whether long-opt was given. */ int def_opt_given ; /**< @brief Whether def-opt was given. */ int enum_opt_given ; /**< @brief Whether enum-opt was given. */ int secret_given ; /**< @brief Whether secret was given. */ int dependant_given ; /**< @brief Whether dependant was given. */ char **inputs ; /**< @brief unamed options (options without names) */ unsigned inputs_num ; /**< @brief unamed options number */ } ; /** @brief The additional parameters to pass to parser functions */ struct cmdline _parser_params { int override; /**< @brief whether to override possibly already present options (default 0) */ int initialize; /**< @brief whether to initialize the option structure gengetopt_args_info (default 0) */ int check_required; /**< @brief whether to check that all required options were provided (default 0) */ int check_ambiguity; /**< @brief whether to check for options already specified in the option structure gengetopt_args_info (default 0) */ } ; /** @brief the purpose string of the program */ extern const char *gengetopt_args_info_purpose; /** @brief the usage string of the program */ extern const char *gengetopt_args_info_usage; /** @brief all the lines making the help output */ extern const char *gengetopt_args_info_help[]; /** @brief all the lines making the full help output (including hidden options) */ extern const char *gengetopt_args_info_full_help[]; /** * The command line parser * @param argc the number of command line options * @param argv the command line options * @param args_info the structure where option information will be stored * @return 0 if everything went fine, NON 0 if an error took place */ int cmdline_parser ( int argc, char * const *argv, struct gengetopt _args_info *args_info); /** * The command line parser (version with additional parameters - deprecated) * @param argc the number of command line options * @param argv the command line options * @param args_info the structure where option information will be stored * @param override whether to override possibly already present options * @param initialize whether to initialize the option structure my_args_info * @param check_required whether to check that all required options were provided * @return 0 if everything went fine, NON 0 if an error took place * @deprecated use cmdline_parser_ext() instead */ int cmdline_parser2 ( int argc, char * const *argv, struct gengetopt _args_info *args_info, int override, int initialize, int check_required); /** * The command line parser (version with additional parameters) * @param argc the number of command line options * @param argv the command line options * @param args_info the structure where option information will be stored * @param params additional parameters for the parser * @return 0 if everything went fine, NON 0 if an error took place */ int cmdline_parser_ext ( int argc, char * const *argv, struct gengetopt _args_info *args_info, struct cmdline _parser_params *params); /** * Save the contents of the option struct into a (text) file. * This file can be read by the config file parser (if generated by gengetopt) * @param filename the file where to save * @param args_info the option struct to save * @return 0 if everything went fine, NON 0 if an error took place */ int cmdline_parser_file_save( const char *filename, struct gengetopt _args_info *args_info); /** * Print the help */ void cmdline_parser_print_help( void ); /** * Print the full help (including hidden options) */ void cmdline_parser_print_full_help( void ); /** * Print the version */ void cmdline_parser_print_version( void ); /** * Allocates dynamically a cmdline_parser_params structure and initializes * all its fields to 0 * @return the initialized cmdline_parser_params structure */ struct cmdline _parser_params *cmdline_parser_params_init(); /** * Initializes the passed gengetopt_args_info structure's fields * (also set default values for options that have a default) * @param args_info the structure to initialize */ void cmdline_parser_init ( struct gengetopt _args_info *args_info); /** * Deallocates the string fields of the gengetopt_args_info structure * (but does not deallocate the structure itself) * @param args_info the structure to deallocate */ void cmdline_parser_free ( struct gengetopt _args_info *args_info); /** * Checks that all the required options were specified * @param args_info the structure to check * @param prog_name the name of the program that will be used to print * possible errors * @return */ int cmdline_parser_required ( struct gengetopt _args_info *args_info, const char *prog_name); extern char *cmdline_parser_enum_opt_values[] ; /**< @brief Possible values for enum-opt. */ #ifdef __cplusplus } #endif /* __cplusplus */ #endif /* CMDLINE1_H */ The <option>_given field is set to a value different from 0 when an argument for <option> has been specified. If the option accepts an argument and it is not of flag type The <option>_arg field is set to the value passed at the command line. The <option>_arg field has the corresponding C type specified in the file passed to gengetopt. Notice that if an option has a default value, then the corresponding <option>_arg will be initialized with that value but the corresponding <option>_given will NOT be initialized to 1. Thus, <option>_given will effectively inform you if the user has specified that command line option. The additional field <option>_orig is always a string containing the original value passed at the command line. This may be different, for instance, in case of numerical arguments: gengetopt converts the passed value (a string) into the corresponding numerical type; due to conversions, float representations, etc., this may not correspond exactly to the original value passed at command line. It can also be different when enumerated options are used (see above): in particular the <option>_arg field will contain a value taken from the specified list, while <option>_orig contains the (non-ambiguous) prefix specified at the command line. The user can always access this original value by using <option>_orig instead of <option>_arg, as he sees fitThe <option>_orig was introduced in the release 2.14.. For instance, gengetopt itself uses the original value when it saves the command line options into a file (see the _file_save function in the following). However, apart from very specific command line processing, the user might hardly need the <option>_orig field, and can be always safely use <option>_arg. The <option>_help contains the string (concerning this very option) that is printed when --help command line is given. If it is of flag type, only the field <option>_flag is generated. The strings cmdline_parser_purpose and cmdline_parser_usage contain the purpose as specified in the input file and the generated “usage” string as printed when --help command line is given. Finally, the string array cmdline_parser_help contains the strings (one for each option) printed when --help command line is given (this array is terminated by a null string element). If hidden options are used also the cmdline_parser_full_help array is available (containing also help strings concerning hidden options). All these strings can be used by the programmer to build a customized help outputThese strings and the <option>_help were introduced in the release 2.17.. Even if <option>_given is 0, the corresponding <option>_arg is set to default value (if one has been specified for <option>). However, in this case, the <option>_orig is set to NULL. Notice that by default the generated function is called cmdline_parser (see the command line options below, to override this name), and it takes the arguments that main receives and a pointer to such a struct, that it will be filled. Another version, cmdline_parser2, can be specified more arguments. Since you typically need this second version only in conjunction with other “kinds” of parsers such as configuration files and multiple parsers, you can find more details about it in . IMPORTANT: The array passed to the parser function (that in turn is passed to getopt_long is expected to have in the first element (of index 0) the name of the program that was invoked. This will be used, for instance, for printing possible errors. cmdline_parser_free can be called to deallocate memory allocated by the parser for string and multiple options. cmdline_parser_init can be called to initialize the struct (it is not mandatory, since it is done automatically by the command line parser). cmdline_parser_file_saveThis function was introduced in the release 2.14. can be used to save the command line options into a file. The contents of this file are consistent with the configuration files (). Notice that if an option has a default value, this option will be saved into the file only if it was passed explicitly at command line (or read from a configuration file), i.e., default values will not be saved into the file. And here's how these functions can be used inside the main program: /* main1.cc */ /* we try to use gengetopt generated file in a C++ program */ /* we don't use autoconf and automake vars */ #include <iostream> #include "stdlib.h" #include "cmdline1.h" using std::cout; using std::endl; int main ( int argc, char **argv) { gengetopt_args_info args_info; cout << "This one is from a C++ program" << endl ; cout << "Try to launch me with some options" << endl ; cout << "(type sample1 --help for the complete list)" << endl ; cout << "For example: ./sample1 *.* --funct-opt" << endl ; /* let's call our cmdline parser */ if (cmdline_parser (argc, argv, &args_info) != 0) exit(1) ; cout << "Here are the options you passed..." << endl; for ( unsigned i = 0 ; i < args_info.inputs_num ; ++i ) cout << "file: " << args_info.inputs[i] << endl ; if ( args_info.funct_opt_given ) cout << "You chose --funct-opt or -F." << endl ; if ( args_info.str_opt_given ) cout << "You inserted " << args_info.str_opt_arg << " for " << "--str-opt option." << endl ; if ( args_info.int_opt_given ) cout << "This is the integer you input: " << args_info.int_opt_arg << "." << endl; if (args_info.flag_opt_given) cout << "The flag option was given!" << endl; cout << "The flag is " << ( args_info.flag_opt_flag ? "on" : "off" ) << "." << endl ; if (args_info.enum_opt_given) { cout << "enum-opt value: " << args_info.enum_opt_arg << endl; cout << "enum-opt (original specified) value: " << args_info.enum_opt_orig << endl; } if (args_info.secret_given) cout << "Secret option was specified: " << args_info.secret_arg << endl; cout << args_info.def_opt_arg << "! "; cout << "Have a nice day! :-)" << endl ; cmdline_parser_free (&args_info); /* release allocated memory */ return 0; } Now you can compile main1.cc and the cmdline1.c generated by gengetopt and link all together to obtain sample1 executable: gcc -c cmdline1.c g++ -c main1.cc g++ -o sample1 cmdline1.o main1.o (Here we assume that getopt_long is included in the standard C library; see and ). Now let's try some tests with this program: $ ./sample1 -s "hello" --int-opt 1234 This one is from a C++ program Try to launch me with some options (type sample1 --help for the complete list) For example: ./sample1 *.* --funct-opt Here are the options you passed... You inserted hello for --str-opt option. This is the integer you input: 1234. The flag is off. Have a nice day! :-) You can also pass many file names to the command line (this also shows how flags work): $ ./sample1 *.h -i -100 -x This one is from a C++ program Try to launch me with some options (type sample1 --help for the complete list) For example: ./sample1 *.* --funct-opt Here are the options you passed... file: cmdline1.h file: cmdline2.h file: cmdline.h file: getopt.h This is the integer you input: -100. The flag is on. Have a nice day! :-) And if we try to omit the --int-opt (or -i), which is required, we get an error: $ ./sample1 This one is from a C++ program Try to launch me with some options (type sample1 --help for the complete list) For example: ./sample1 *.* --funct-opt sample1: `--int-opt' (`-i') option required! Now, let's test the enumerated options, notice the use of a prefix for specifying an acceptable value, and the difference between the actual passed value and the one recorded in <option>_arg: $ ./sample1 -i 10 --enum-opt h ... enum-opt value: hello enum-opt (original specified) value: h ... While the next one raises an ambiguity error (between "bar" and "bye"): $ ./sample1 -i 10 --enum-opt b ... ./sample1: ambiguous argument, "b", for option `--enum-opt' Here is the output of --help of the parser generated from sample1.ggo by specifying the following options to gengetopt: --long-help -u --show-required (see for further explanation for these command line options). This one is from a C++ program Try to launch me with some options (type sample1 --help for the complete list) For example: ./sample1 *.* --funct-opt sample1 2.0 Usage: sample1 -iINT|--int-opt=INT [-h|--help] [--full-help] [-V|--version] [-sfilename|--str-opt=filename] [-mINT|--my-opt=INT] [--flag-opt] [-F|--funct-opt] [--long-opt=LONG] [--def-opt=STRING] [--enum-opt=STRING] [-DINT|--dependant=INT] [FILES]... -h, --help Print help and exit --full-help Print help, including hidden options, and exit -V, --version Print version and exit -s, --str-opt=filename A string option, for a filename A brief text description before the other options. -m, --my-opt=INT Another integer option, this time the description of the option should be "quite" long to require wrapping... possibly more than one wrapping :-) especially if I require a line break -i, --int-opt=INT A int option (mandatory) more involved options: the following options are more complex --flag-opt A flag option (default=off) -F, --funct-opt A function option last option section: --long-opt=LONG A long option --def-opt=STRING A string option with default (default=`Hello') --enum-opt=STRING A string option with list of values (possible values="foo", "bar", "hello", "bye" default=`hello') -D, --dependant=INT option that depends on str-opt An ending text. wrapping Notice how filename is printed instead of STRING for the option --str-opt (since typestr was used in the sample1.ggo file) and how the description of --my-opt is wrapped to 80 columns, and how the \n is actually interpreted as a newline request. Also the usage string is wrapped. Moreover, since -S,--secret is hidden an hidden option (See Hidden options.) it is not printed; --full-help if you wanted that to be printed, you should use --full-help. Finally, notice how the text strings are printed in the help output (and the empty line after the “more involved options” section achieved with an empty text string). If you're curious you may want to take a look at the generated C file cmdline1.c. You may find other examples in /prefix/share/doc/gengetopt/examples or in the tests of the source tarbal. Invoking gengetopt invoking gengetopt options This is the output of gengetopt --help: gengetopt This program generates a C function that uses getopt_long function to parse the command line options, validate them and fill a struct. Usage: gengetopt [OPTIONS]... -h, --help Print help and exit -V, --version Print version and exit Main options: -i, --input=filename input file (default std input) -f, --func-name=name name of generated function (default=`cmdline_parser') -a, --arg-struct-name=name name of generated args info struct (default=`gengetopt_args_info') -F, --file-name=name name of generated file (default=`cmdline') --output-dir=path output directory -c, --c-extension=ext extension of c file (default=`c') -H, --header-extension=ext extension of header file (default=`h') -l, --long-help long usage line in help --default-optional by default, an option is considered optional if not specified otherwise -u, --unamed-opts[=STRING] accept options without names (e.g., file names) (default=`FILES') The parser generated is thought to be used to parse the command line arguments. However, you can also generate parsers for configuration files, or strings that contain the arguments to parse, by using the following two options. -C, --conf-parser generate a config file parser -S, --string-parser generate a string parser (the string contains the command line) Additional options: -G, --include-getopt adds the code for getopt_long in the generated C file -n, --no-handle-help do not handle --help|-h automatically -N, --no-handle-version do not handle --version|-V automatically -e, --no-handle-error do not exit on errors --show-required[=STRING] in the output of help will specify which options are mandatory, by using the optional passed string (default=`(mandatory)') -g, --gen-version put gengetopt version in the generated file (default=on) --set-package=STRING set the package name (override package defined in the .ggo file) --set-version=STRING set the version number (override version defined in the .ggo file) --show-help show the output of --help instead of generating code --show-full-help show the output of --help (including hidden options) instead of generating code --show-version show the output of --version instead of generating code Please refer to the info manual for further explanations. The options should be clear; in particular: --func-name --func-nameif no --func-name is given, cmdline_parser is taken by default; --output-dir --output-dirif no --output-dir Since version 2.17. is given, thefiles are generated in the current directory; --arg-struct-name --arg-struct-nameallows to specify the name of the generated struct for command linearguments (default is gengetopt_args_info) --long-help --long-helpthe “Usage” line reports all the options;this may be unpleasant if options are many; --default-optional --default-optionalIf this command line option is given, by default, options are consideredoptional (if not explicitly specified otherwise). Otherwise, optionsare considered mandatory (if not explicitly specified otherwise). --unamed-opts --unamed-optsthe program will accept also options without a name, which, in mostcase, means that we can pass many file names to the program (see theexample in , where we call sample1 *.h). You canspecify an optional description for these additional names (default isFILES). --no-handle-help--no-handle-version --no-handle-help --no-handle-versionif --no-handle-help (--no-handle-version) is given thecommand line option --help|-h (--version|-V) is nothandled automatically, so the programmer will be able to print someother information; then the function for printing the standard help(version) response can be used; this function is called<parser-name>_print_help (<parser-name>_print_version),where <parser-name> is the name specified with --func-nameor the default, cmdline_parser. --no-handle-error --no-handle-errorif --no-handle-error is given, an error in the parsing does notprovoke the exit of the program; instead, since the parser function, incase of an error, returns a value different 0, the program can print ahelp message, as gengetopt itself does in case of an error (try it!). --show-required --show-requiredif --show-required is given, possibly witha string, in the output of --help will be made explicitwhich options are actually required, See Basic Usage. --gen-version --gen-versionis a flag (default on) that when disabled does not put in the outputfile the gengetopt version (it is useful for testing purposes). --conf-parser --conf-parserDetailed in . --string-parser --string-parserDetailed in . --include-getopt --include-getoptAdds the code for getopt_long into the generated parser C file.This will make your generated parser much bigger, but it will becompiled in any system, even if getopt_long is not part of the Clibrary where your program is being compiled. See also . --show-help--show-full-help--show-version --show-help --show-full-help --show-versiononly make gengetopt show the output of --help,--full-help and --version command lines withoutgenerating any code, See Automatically added options.For instance, I use the --show-help option to generate atexinfo file with the output of help (this also shows an example ofuse of --set-package and --set-version): ../src/gengetopt --show-help -i ../src/cmdline.ggo \ --set-package="gengetopt" \ --set-version="" > help_output.texinfo You may have already guessed it: gengetopt uses gengetopt itself for command line options, and its specification file is cmdline.ggo in the source directory. In particular the command line for gengetopt itself is generated with the following command: gengetopt --input=cmdline.ggo --no-handle-version \ --no-handle-help --no-handle-error Indeed when --help|-h is passed on the command line, gengetopt will call cmdline_parser_print_help() and then the lines for reporting bugs. When --version|-V is passed, it will call cmdline_parser_print_version() and then prints a copyright. If an error occurs it prints a message on the screen: $ ./gengetopt --zzzz ./gengetopt: unrecognized option `--zzzz' Run gengetopt --help to see the list of options. Terminology Terminology argument, defined option, defined value, defined parameter, defined short option, defined long option, defined multiple option, defined required option, defined An argument is an element of the argv array passed into your C or C++ program by your operating system. An option is an argument that begins with -, or --. A value is an argument, or part of an argument, that is associated with a particular option (an option may also not accept any value). For example, in > ls --width=80 ls is called with one argument, --width=80, which is an option that has a value, 80, while in > ls --width 80 ls is called with two arguments, --width, which is an option, and 80 which might or might not be a value. In this case, whether the 80 is treated as a value associated with the preceding --width option, or as the name of a file to list depends on how ls parses the --width option. The order in which options are specified is usually unimportant: > ls -a -l > ls -l -a both do exactly the same thing. An parameter is an argument that is not an option. For example, in > cp --archive source dest cp is called with three arguments, the option --archive, the parameter source, and the parameter dest. Unlike options, the order in which parameters are specified usually is important: > cp --archive --verbose source dest > cp --verbose --archive source dest > cp --archive source --verbose dest > cp --archive --verbose dest source The first three cp commands do the same thing, but the fourth one is completely different. If you're new to Gengetopt, you may wish to skip the rest of this section. It goes into more detail about different sorts of options, and how they are parsed. Note that some parameters may begin with - or --. Equivalently, not all arguments that begin with - or -- are options. Consider > ls -- -file > tar -c -f - . > ../foo.tar The ls command has two arguments; the first argument, -- is ignored by ls, but causes the -file argument to be interpreted as a parameter. The tar command has four arguments. The -c argument tells tar to create an archive; the -f argument, which takes a value, -, tells tar that the archive should be written onto the standard output, and the fourth argument, ., tells tar what directories to include in the archive. (The remaining two items, > and ../foo.tar, tell the shell to redirect the tar command's output to the file ../foo.tar. The tar command doesn't even see them.) The GNU convention is that - by itself is always interpreted as a value or parameter, while the first -- by itself is always ignored, but causes all subsequent arguments to be interpreted as parameters. Gengetopt always behaves this way. A short option is an option that begins with -. Not including the leading dash, short options must be one character long: > ls -a -l -t --width=80 The -a, -l, and -t options are all short options. Multiple short options may be combined into a single argument: > ls -alt --width=80 is equivalent to the above example. A long option is an option that begins with - or --. Ignoring the leading punctuation, long options may be one or more characters long: > ls --all -fs The ls command has two arguments; the long option --all, and the pair of short options -fs. Long options need not have synonymous short options; after all, complex programs like cc have more long options than there are valid short option characters; it wouldn't be possible to assign a short option to each of them. Short options are encouraged, but not required, to have a synonymous long option. Long options may be abbreviated, as long as the abbreviation is not ambiguous. Gengetopt automatically treats unambiguous abbreviations as synonyms. Short options may have values just like long options, but if several short options are grouped together into one argument, only the last one may have a value. Values in the same argument as a long option are delimited by an equals sign, values in the same argument as a short option are not: > ls --width 60 # ok, value is "60" > ls --width=60 # ok, value is "60" > ls -w60 # ok, value is "60" > ls -w 60 # ok, value is "60" > ls -w=60 # unexpected, value is "=60" > ls -T7 -w60 # ok, value for -T is 7, value for -w is 60 > ls -T7w60 # unexpected, value for -T is "7w60", no -w at all A required option must be present, otherwise an error will be raised. A multiple option is an option that may appear more than once on the command line. Gengetopt would create a tidy array for multiple options (see , for further details about dealing with multiple options). Group options group options It is also possible to group options; options belonging to a group are considered in mutual exclusion. In order to use this feature, first the group has to be defined, and then a groupoption can be defined. A groupoption has basically the same syntax of a standard option, apart that the required flag must not be specified (it would not make sense, since the options of the same group are mutual exclusive) and the group to which the option belongs has to be specified. defgroup "<group name>" {groupdesc="<group description>"} {yes} groupoption <long> <short> "<desc>" <argtype> group="<group name>" \ {argoptional} {multiple} If a group is defined as required, then one (but only one) option belonging to the group has to be specified. Here's an example (taken from the test test_group_cmd.ggo): defgroup "my grp2" defgroup "grp1" groupdesc="an option of this group is required" required groupoption "opta" a "string a" group="grp1" multiple groupoption "optA" A "string A" string group="grp1" argoptional groupoption "optAmul" M "string M" string group="grp1" argoptional multiple groupoption "optb" b "string b" group="grp1" groupoption "optc" - "string c" group="my grp2" groupoption "optd" d "string d" group="my grp2" The group grp1 is required, so either --opta or --optb has to be specified (but only one of them). Here's the output of some executions: $ ./test_groups test_groups: 0 options of group grp1 were given. One is required $ ./test_groups -a OK $ ./test_groups -a -a OK (the same option given twice) $ ./test_groups -a -b test_groups: 2 options of group grp1 were given. One is required $ ./test_groups -a -c OK $ ./test_groups -a --optc -d test_groups: 2 options of group my grp2 were given. At most one is required Parser function additional parameters parser parameters parameters Besides the parser functions, in the generated header file, gengetopt also generatesSince version 2.21. an additional structure <cmd_parser_name>_params that can be used to customize the invocation of the generated parsers (it is especially useful when using configuration file parsers, , string parsers, , and, in general, multiple parsers). These are the fields of this structure (as usual, boolean options are represented as int and they are true if they are set to 1 and false if they are set to 0): int initialize initializetells whether the args_info struct has to be initialized. int override overridetells whether the values for the options that are parsed should overridethose that are already present in the passed args_info struct (e.g.,this is the case when you call a parser multiple times using the sameargs_info struct, see, e.g., and). int check_required check_requiredtells whether the check for required options must be performed or not. int check_ambiguity check_ambiguitytells whether the check whether options that are parsed are notalready present in the passed args_info struct; this is performed onlyfor NON multiple options (see also ). For instance, internally, the standard command line parser function is invoked with initialize and check_required set to 1 and override set to 0. Gengetopt also generates an initialization function for such structures, called <cmd_parser_name>_params_init, which returns a dynamically allocated structure with all fields initialized to 0. We strongly advise to use such function for creating such a structure, since this will make your code scalable to future releases of gengetopt where such structure might contain additional fields. Otherwise, you might risk to use a structure where some fields are not initialized, with unpredictable results. Furthermore, since the function returns a pointer to a dynamically allocated structure (with malloc), it is up to you to deallocate that structure when you no longer need it (with free). Some examples of usage of this parameters struct are shown in . Configuration files configuration files -C,--conf-parser It is often useful to specify command line options directly in a configuration file, so that the value of some options are read from this file if they are not given as command line options. When the command line option -C|--conf-parser is given to gengetopt, apart from the standard command line option parser, also this additional parser is generated (its name is <cmd_parser_name>_config_fileThe previous function <cmd_parser_name>_configfile — notice the absence of the _ — is deprecated and should be no longer used, since it might be removed in the future releases.): <cmd_parser_name>_config_file int <cmd_parser_name>_config_file(char * const filename, struct gengetopt_args_info *args_info, struct <cmd_parser_name>_params *params); The parameter structure <cmd_parser_name>_params is described in . For instance, params->override tells whether the values read in the configuration file have to override those specified at the command line. IMPORTANT: you have to explicitly set params->initialize to 1 if you call the config file parser before the standard command line option parser, otherwise unpredictable results may show. If you call the config file parser before the standard command line option parser and then you want to call the standard command line parser you MUST use this second version of the parser function, with params->initialize set to 0, so that collected values from the config file are not lostThe previous function <cmd_parser_name>2 — notice the 2 — is deprecated and should be no longer used, since it might be removed in the future releases.: <cmd_parser_name>_ext int <cmd_parser_name>_ext (int argc, char * const *argv, struct gengetopt_args_info *args_info, struct <cmd_parser_name>_params *params); Notice, that with this version you can also specify whether the options passed at the command line must override the ones read from the config file. Moreover, you have to specify whether the check for missing required options must be performed or not. This concerns also options of a required group (). If you decide not to request the check for required option, you can test it manually, after the command line parsing returns by using the following generated function: <cmd_parser_name>_required int <cmd_parser_name>_required (struct gengetopt_args_info *args_info, const char *program_name); where program_name is the name of your executable (usually you should pass argv[0] as argument). If the function returns a value different from 0, then some required options are missing. An error has already been printed by this function. This concerns also options of a required group (). The config file has the following simple syntax: lines starting with # are considered comments and: <option_name> = {<option_val>} or simply (if the option does not take an argument): <option_name> which means that option_name is given, and if it accepts an argument, then its value is option_val. The = is not mandatory. include Since version 2.19, it is possible to include other files (i.e., other configuration files) in a configuration file, by using the include syntax: include "filename" For instance here's a program that uses this feature (this is the test test_conf_parser): /* test_conf_parser.c test */ /* test all kinds of options and the conf file parser */ #include <stdlib.h> #include <stdio.h> #include "test_conf_parser_cmd.h" static struct my_args_info args_info; int main ( int argc, char **argv) { int i; int result = 0; if (test_conf_parser_cmd_parser (argc, argv, &args_info) != 0) { result = 1; goto stop; } /* override cmd options, but do not initialize args_info, check for required options */ if (test_conf_parser_cmd_parser_configfile (args_info.conf_file_arg, &args_info, 1, 0, 1) != 0) { result = 1; goto stop; } printf ("value of required: %s\n", args_info.required_arg); printf ("value of string: %s\n", args_info.string_arg); printf ("value of no-short_given: %d\n", args_info.no_short_given); printf ("value of int: %d\n", args_info.int_arg); printf ("value of float: %f\n", args_info.float_arg); printf ("value of multi-string_given: %d\n", args_info.multi_string_given); for (i = 0; i < args_info.multi_string_given; ++i) printf (" value of multi-string: %s\n", args_info.multi_string_arg [i]); printf ("value of multi-string-def_given: %d\n", args_info.multi_string_def_given); for (i = 0; i < args_info.multi_string_def_given; ++i) printf (" value of multi-string-def: %s\n", args_info.multi_string_def_arg [i]); if (!args_info.multi_string_def_given && args_info.multi_string_def_arg [0]) printf ("default value of multi-string-def: %s\n", args_info.multi_string_def_arg [0]); printf ("value of opta: %s\n", args_info.opta_arg); printf ("noarg given %d times\n", args_info.noarg_given); printf ("noarg_noshort given %d times\n", args_info.noarg_noshort_given); printf ("opt-arg given: %d\n", args_info.opt_arg_given); printf ("opt-arg value: %s\n", (args_info.opt_arg_arg ? args_info.opt_arg_arg : "not given")); if (args_info.file_save_given) { if (test_conf_parser_cmd_parser_file_save (args_info.file_save_arg, &args_info) == EXIT_FAILURE) result = 1; else printf ("saved configuration file %s\n", args_info.file_save_arg); } stop: test_conf_parser_cmd_parser_free (&args_info); return result; } So if we use the following config file # required option required "this is a test" float 3.14 no-short string another and we run test_conf_parser like that, we will have ./test_conf_parser -r bar -i 100 --float 2.14 --conf-file test_conf.conf value of required: this is a test value of string: another value of no-short: 1 value of int: 100 value of float: 3.140000 If, instead we call the test_conf_parser_cmd_parser_configfile with 0 for override argument, we get the following result value of required: bar value of string: another value of no-short: 1 value of int: 100 value of float: 2.140000 This second example use the second version of the command line parser: first call the configuration file parser and then the command line parser (the command line options will override the configuration file options): /* test_conf_parser_ov2.c test */ /* test all kinds of options and the conf file parser */ /* differently from test_conf_parser_ov.c, first scan the conf file and then the command line */ #include <stdlib.h> #include <stdio.h> #include "test_conf_parser_cmd.h" static struct my _args_info args_info; int main ( int argc, char **argv) { struct test _conf_parser_cmd_parser_params *params; /* initialize the parameters structure */ params = test_conf_parser_cmd_parser_params_init(); /* initialize args_info NOTICE: the other fields of the structure are already initialized to 0. */ params->initialize = 1; /* call the config file parser */ if (test_conf_parser_cmd_parser_config_file ("./test_conf2.conf", &args_info, params) != 0) exit(1); /* override config file options, do not initialize args_info, check for required options. */ params->initialize = 0; params->override = 1; params->check_required = 1; /* call the command line parser */ if (test_conf_parser_cmd_parser_ext (argc, argv, &args_info, params) != 0) exit(1) ; printf ("value of required: %s\n", args_info.required_arg); printf ("value of string: %s\n", args_info.string_arg); printf ("value of no-short_given: %d\n", args_info.no_short_given); printf ("value of int: %d\n", args_info.int_arg); printf ("value of float: %f\n", args_info.float_arg); /* release memory */ test_conf_parser_cmd_parser_free (&args_info); free (params); return 0; } This is an invocation and its results: ./test_conf_parser_ov2 -r "bar" --float 2.14 -i 100 value of required: bar value of string: another value of no-short: 1 value of int: 100 value of float: 2.140000 If on the above code you substitute params->override = 1 with params->check_ambiguity = 1 (see the test file test_conf_parser_ov4.c), then the following invocation will generate an error: ./test_conf_parser_ov4 -r "bar" -i 100 ./test_conf_parser_ov4: `--required' (`-r') option given more than once since the -r option is specified both in the configuration file and at the command line. Further details on the configuration file parser The generated config file parser function uses the constant CONFIG_FILE_LINE_SIZE to read each line of the configuration file. By default this constant is set to 2048 that should be enough for most applications. If your application uses configuration files with lines that are longer, you can compile the generated C file by specifying an explicit value for this constant with the -D command line option of gcc. Multiple Options multiple options If an option is specified as multiple, then it can be specified multiple times at command line. In this case, say the option is called foo, the generated foo_given field in the args structure contains the number of times it was specified and the generated field foo_arg is an array containing all the values that were specified for this option. Notice that if a default value is specified for a multiple option, that value is assigned to the option only if no other value is specified on the command line (and the corresponding _given field will be set to 1), i.e., a default value IS NOT always part of the values of a multiple option. For instance, if the gengetopt file is as follows # test options that can be given more than once option "string" s "string option" string optional multiple option "int" i "int option" int optional multiple Then the command line options can be collected like that Then if this program is called with the following command line options /* test options that can be given more than once */ #include <stdlib.h> #include <stdio.h> #include "test_multiple_cmd.h" static struct gengetopt_args_info args_info; int main ( int argc, char **argv) { int i = 0; if (test_multiple_cmd_parser (argc, argv, &args_info) != 0) exit(1) ; for (i = 0; i < args_info.string_given; ++i) printf ("passed string: %s\n", args_info.string_arg[i]); for (i = 0; i < args_info.int_given; ++i) printf ("passed int: %d\n", args_info.int_arg[i]); return 0; } The output of the program will be passed string: world passed string: hello passed string: bar passed string: foo passed int: 200 passed int: 100 You can also pass arguments to a multiple option separated by commas (if you need to actually specify the comma operator as part of the argument you can escape it with \), as in the following: ./test_multiple -s"foo","bar","hello" -i100,200 -s "world" You can specify the number of occurrences of multiple options by using the following syntax (that must be given after the multiple keyword): (number) requires that the multiple option, if given, must be given exactlynumber times (number1-number2) requires that the multiple option, if given, must be given not less thannumber1 times and no more than number2 times (number-) requires that the multiple option, if given, must be given not less thannumber times (-number) requires that the multiple option, if given, must be given not more thannumber times Here are some examples: option "string" s "string option" string optional multiple(4) option "string" s "string option" string optional multiple(1-4) option "string" s "string option" string optional multiple(-5) Notice that this is independent from the required flag. String Parsers and Multiple Parsers multiple parsers string parsers The parsers generated by gengetopt (indeed the C and header files) are self-contained and different parsers can be linked in the same program, without interferences. This is useful, e.g., in cases where a specific command line option argument has a complex syntax that accepts options itself according to terminology already defined, i.e., the one handled by getopt_long, see . Another case when multiple parsers can be useful is when your command behaves differently according to a specific command line option. Obviously there exists only one instance of command line arguments passed to the main function (namely the variables argc and argv) so passing the same arguments to different command line parsers is likely to generate errors: the different command line parsers are likely to have different syntaxes for accepted options. -S,--string-parser For this reason gengetopt can generate parser functions that take a string containing the further options to parse, instead of taking an array. This additional parser will have the parser name and the suffix _string. If you want these additional parsers to be generated you have to pass the command line option -S|--string-parser to gengetopt (see ). The two functions will be: int <parser_name>_string (const char *cmdline, struct test_first_cmdline_cmd_struct *args_info, const char *prog_name); int <parser_name>_string_ext (const char *cmdline, struct test_first_cmdline_cmd_struct *args_info, const char *prog_name, struct <cmd_parser_name>_params *params); The second versionThe previous function <cmd_parser_name>_string2 — notice the 2 — is deprecated and should be no longer used, since it might be removed in the future releases. allows you to specify more details about the parsing, using the <cmd_parser_name>_params structure, shown in (this is the same as for configuration files, thus we refer to that section for the details of the two functions and default values, see ). Of course, these functions can be used in general to simulate the invocation of a program with specific command line options (stored in the first string argument), or in general to parse options that are all stored in a string (instead of a vector). The first argument of these parsers is a string containing the options to parse (remember that this must respect the option format handled by getopt_long, see ). The second one is the pointer to the struct that will be filled with passed options and arguments, as usual. The third option is the program name: this will be used when errors have to be printed. This last argument can be null: in this case, the first element of the first string argument is considered the program name. Let's show these functionalities with an example. Consider a program that accepts two command line options (required in this case): # test for multiple parsers, this is the main file # test_main_cmdline_cmd.ggo option "first-cmd" F "the first command line to parse" required \ typestr="first command" string multiple option "second-cmd" S "the second command line to parse" required \ typestr="second command" string multiple These two options accept strings as argument that in turn are considered command line arguments, according to specific syntaxes. The first one is: # test for multiple parsers, this is the first command line file # test_first_cmdline_cmd.ggostr option "option-a" a "option a of the first command line to parse" optional int option "multi" M \ "multiple option of the first command line to parse" \ optional string multiple and the second one is: # test for multiple parsers, this is the second command line file # test_second_cmdline_cmd.ggostr option "option-a" a "option a of the second command line to parse" \ optional string option "option-b" b "option a of the second command line to parse" \ optional string option "my-multi" M \ "multiple option of the second command line to parse" \ optional string multiple These last two files are processed with gengetopt using the --string-parser. Let's put everything together in this main file: #include <stdio.h> #include <stdlib.h> #include "test_main_cmdline_cmd.h" #include "test_first_cmdline_cmd.h" #include "test_second_cmdline_cmd.h" int main( int argc, char **argv) { struct gengetopt _args_info main_args_info; struct test _first_cmdline_cmd_struct first_args_info; struct test _second_cmdline_cmd_struct second_args_info; int exit_code = 0, i, j; if (test_main_cmdline_cmd_parser (argc, argv, &main_args_info) != 0) { exit_code = 1; return exit_code; } for (j = 0; j < main_args_info.second_cmd_given; ++j) { printf("second cmdline: %s\n", main_args_info.second_cmd_arg[j]); if (test_second_cmdline_cmd_parser_string (main_args_info.second_cmd_arg[j], &second_args_info, argv[0]) == 0) { if (second_args_info.option_a_given) printf(" --option-a: %s\n", second_args_info.option_a_arg); if (second_args_info.option_b_given) printf(" --option-b: %s\n", second_args_info.option_b_arg); for (i = 0; i < second_args_info.my_multi_given; ++i) printf(" --my-multi: %s\n", second_args_info.my_multi_arg[i]); test_second_cmdline_cmd_parser_free (&second_args_info); } } for (j = 0; j < main_args_info.first_cmd_given; ++j) { printf("first cmdline: %s\n", main_args_info.first_cmd_arg[j]); if (test_first_cmdline_cmd_parser_string (main_args_info.first_cmd_arg[j], &first_args_info, argv[0]) == 0) { if (first_args_info.option_a_given) printf(" --option-a: %d\n", first_args_info.option_a_arg); for (i = 0; i < first_args_info.multi_given; ++i) printf(" --multi: %s\n", first_args_info.multi_arg[i]); test_first_cmdline_cmd_parser_free (&first_args_info); } } test_main_cmdline_cmd_parser_free (&main_args_info); return exit_code; } Notice that in the for loops we always free the elements of the argument structures in order to avoid memory leaks. Now if you can run this program as follows (notice that we use the comma separated arguments for multiple option arguments but we escape it with \ because otherwise, e.g., 200 and 300 would be intended as further arguments of --first-cmd instead of --multi, see ): ./test_multiple_parsers \ --first-cmd="-M400 -a10 --multi 100\,200\,300" \ --second-cmd="-a20 -b10 --my-multi=a\,b\,c\,d\,e\,f" \ -F"-M500 -M600" -S"--my-multi g" second cmdline: -a20 -b10 --my-multi=a,b,c,d,e,f --option-a: 20 --option-b: 10 --my-multi: a --my-multi: b --my-multi: c --my-multi: d --my-multi: e --my-multi: f second cmdline: --my-multi g --my-multi: g first cmdline: -M400 -a10 --multi 100,200,300 --option-a: 10 --multi: 400 --multi: 100 --multi: 200 --multi: 300 first cmdline: -M500 -M600 --multi: 500 --multi: 600 What if getopt_long is not available? getopt_long If you use gengetopt to generate C functions for parsing command line arguments you have to know that these generated functions use getopt_long to actually read the command line and parsing it. This function is typically part of the standard C library, but some implementations may not include it. If you want your program to be portable on several systems, and be compilable with many C compilers, you can rely on one of the following solutions. Include the getopt_long code into the generated parser Since version 2.17, gengetopt can include into the generated C parser file the code of getopt_long, so that the include code will be used to actually parse the command line arguments, instead of that taken from the C library. This solution is actually quite easy, but it has two main drawbacks: The generate C file of the parser will be much bigger; You won't be able to use the latest version of getopt_longof the C library It is up to you to choose between this and the automake/autoconf based solution. Actually, this solution has the advantage that your program won't behave strangely when used with another implementation of getopt_long. I prefer the automake/autoconf based solution, as described in , in particular the one described in , which is also the one I adopt for gengetopt itself. Use automake/autoconf to check for the existence of getopt_long automake autoconf Autoconf and Automake are great tools to generate a configure script that automatically checks for the configuration of your system and for possible missing functions required to compile your program. However, in case of detected missing functions, your program must be able to provide a replacement for such functions. In the next sections we describe two mechanisms for including the (possible) missing code for getopt_long and for checking its presence with automake/autoconf. Since version 2.19, gengetopt itself uses the first mechanism. Use Gnulib gnulib Since version 2.19 I also started to use Gnulib - The GNU Portability Libraryhttp://www.gnu.org/software/gnulib, “a central location for common GNU code, intended to be shared among GNU packages”. Gnulib provides an easy and smooth way to add to your package sources the sources of functions that you want to check during configure. It will also handle the checks for these functions in the configure script, and in case they're not in your system (or they're present but with some missing features) it compiles their sources into a library (that you will need to link your program to, as illustrated in the following). Once you retrieved gnulib (for the moment it is available only through CVS, see the home page), you can invoke ‘gnulib-tool --import’ that will copy source files, create a Makefile.am to build them, generate a file gnulib-comp.m4 with Autoconf M4 macro declarations used by configure.ac, and generate a file gnulib-cache.m4 containing the cached specification of how Gnulib is used. In particular, you must specify the modules you want to import, and in our case, it is getopt: gnulib-tool --import getopt By default, the source code is copied into lib/ and the M4 macros in m4/. You can override these paths by using --source-base=DIRECTORY and --m4-base=DIRECTORY. For instance, gengetopt uses gl and gl/m4, respectively. We will use these directories in the rest of this section. You must ensure Autoconf can find the macro definitions in gnulib-comp.m4. Use the ACLOCAL_AMFLAGS specifier in your top-level Makefile.am file (and the first time you run aclocal you have to use the -I as well); for instance, in the case of gengetopt we have: ACLOCAL_AMFLAGS = -I gl/m4 You are now ready to call the M4 macros in gnulib-comp.m4 from configure.ac. The macro gl_EARLY must be called as soon as possible after verifying that the C compiler is working. Typically, this is immediately after AC_PROG_CC, as in: ... AC_PROG_CC gl_EARLY ... The core part of the gnulib checks are done by the macro gl_INIT. Place it further down in the file, typically where you normally check for header files or functions. For example: ... # For gnulib. gl_INIT ... gl_INIT will in turn call the macros related with the gnulib functions, be it specific gnulib macros. So there is no need to call those macros yourself when you use the corresponding gnulib modules. You must also make sure that the gnulib library is built. Add the Makefile in the gnulib source base directory to AC_CONFIG_FILES, as in: AC_CONFIG_FILES(... gl/Makefile ...) You must also make sure that make will recurse into the gnulib directory. To achieve this, add the gnulib source base directory to a SUBDIRS Makefile.am statement, as in: SUBDIRS = gl Finally, you have to add compiler and linker flags in the appropriate source directories, so that you can make use of the gnulib library. Since the ‘getopt’ module copies files into the build directory, top_builddir/gl is needed as well as top_srcdir/gl. For example: ... AM_CPPFLAGS = -I$(top_srcdir)/gl -I$(top_builddir)/gl ... LDADD = gl/libgnu.a ... Don't forget to #include the various header files. In this example, you would need to make sure that ‘#include "getopt.h"’ is evaluated when compiling all source code files, that want to make use of getopt or getopt_long. If you simply use the files generated by gengetopt, you won't need include this header though, since it is already handled by the generated files. Every now and then, check whether there are updates in the Gnulib modules, and if the modules you use (e.g., getopt) are upgraded, please remember to also update your files, simply by running: gnulib-tool --update We refer to Gnulib documentation for further explanations and features. Use getopt_long sources NOTICE: this was the procedure used by gengetopt itself up to version 2.18. We suggest now to use the procedure described in , since the files described in the following might not be kept up-to-date. automake autoconf We provide C files that actually implement getopt_long function: getopt.c getopt1.c and gnugetopt.h. You'll find these files in the <install prefix>/share/gengetopt directory where <install prefix> is the one you specified during compilation. If no prefix had been specified, /usr/local is the default. If you downloaded gengetopt in binary form prefix will probably be /usr/local or /usr. You can rename gnugetopt.h to getopt.h and then simply compile these files and link them to the executable of you program. However, if you use automake and autoconf here's a more elegant solution: you should download the file adl_func_getopt_long.m4 you find at this site: http://autoconf-archive.cryp.to and add its contents to your acinclude.m4. You can find this macro also in the acinclude.m4 in the sources of gengetopt. This macro checks if getopt_long function is in C library; if it is not then it adds getopt.o and getopt1.o to the objects files that will be linked to your executable (LIBOBJS). Then in Makefile.am of your source directory you have to add the contents of LIBOBJS to the LDADD of the program that has to use getopt_long; e.g., if the program foo has to use getopt_long, you have to add the following line foo_LDADD = @LIBOBJS@ Now these files will be compiled and linked to your program only if necessary. Moreover you have to add getopt.c getopt1.c and gnugetopt.h to your distribution. Note that it is not necessary to put these file names among the foo_SOURCES contents), but you have to add gnugetopt.h to EXTRA_DIST: EXTRA_DIST = gnugetopt.h You may want to take a look at gengetopt's configure.in and src/Makefile.am: they both use the techniques described here. Known Bugs and Limitations Known Bugs Limits Misfeatures If you find a bug in gengetopt, please send electronic mail to bug-gengetopt at gnu dot org Include the version number, which you can find by running ‘gengetopt --version’. Also include in your message the output that the program produced and the output you expected. If you have other questions, comments or suggestions about gengetopt, contact the author via electronic mail (find the address at http://www.lorenzobettini.it). The author will try to help you out, although he may not have time to fix your problems. The list of to-dos in the TODO. Getopt and subsequent calls It seems that getopt_long, at least the version in the GNU library, if invoked with different argv arrays, might access memory in a bad way leading to crashes or unexpected behaviors. This happens because it keeps pointers to locations of the previous arrays if not initialized each time by setting optind = 0optind is the global variable in getopt implementation that is the index in ARGV of the next element to be scanned. This is used for communication to and from the caller and for communication between successive calls to getopt_long.. Unfortunately this initialization behavior seems to be part only of the implementation of GNU library and actually it is not documented (you can see it by taking a look into the source of getopt.c); other implementations of getopt_long might not be affected by this problem; alternatively, as reported by a user, optind = 0 leads some getopt_long implementations to consider the program name as a command line option (since it is in position 0), which is bad anyway! Probably this is usually not a problem since you usually parse only the command line, thus you only invoke the command line parser only once, and only with one instance of array (i.e., the argv passed to main). However, it can lead to problems when you use advanced features, as in the case of configuration file parsing (see ) and multiple parsers (see ). To deal with this problem, in case one uses configuration parsers (-C,--conf-parser) or string parsers (-S,--string-parser) a customized version of getopt_long, called indeed custom_getopt_long custom_getopt_long is inserted in the generated C file. This version does not suffer from the problem above (and of course does not interfere with the standard getopt_long, which will be used to parse the actual command line arguments). Of course this is transparent to the programmer, and we report this detail here only because the inserted custom_getopt_long will add about 20k of C code in the generated file, so don't panic if you start to use configuration or string parsers and your program gets a little bigger than before :-). Mailing Lists mailing list The following mailing lists are available: help-gengetopt at gnu dot org for generic discussions about the program and for asking for help about it (open mailing list), http://mail.gnu.org/mailman/listinfo/help-gengetopt info-gengetopt at gnu dot org for receiving information about new releases and features (read-only mailing list), http://mail.gnu.org/mailman/listinfo/info-gengetopt. If you want to subscribe to a mailing list just go to the URL and follow the instructions, or send me an e-mail and I'll subscribe you. I'll describe new features in new releases also in my blog, at this URL: http://tronprog.blogspot.com/search/label/gengetopt xreflabel="Index" id="Index"> Index --arg-struct-name, see --conf-parser, see --default-optional, see --default-optional, see --full-help, see --func-name, see --gen-version, see --include-getopt, see --long-help, see --no-handle-error, see --no-handle-help, see --no-handle-version, see --output-dir, see --show-full-help, see --show-help, see --show-required, see --show-version, see --string-parser, see --unamed-opts, see -C,--conf-parser, see -h,--help, see -S,--string-parser, see -V,--version, see <cmd_parser_name>_config_file, see <cmd_parser_name>_ext, see <cmd_parser_name>_required, see A argoptional, see args, see argtype, see argument, defined, see Audience, see autoconf, see autoconf, see autoconf, see autogen.sh, see automake, see automake, see automake, see C check_ambiguity, see check_required, see Conditions for copying Gengetopt, see configuration files, see Copying conditions, see custom_getopt_long, see CVS, see D default, see dependon, see desc, see description, see download, see G gengetopt options, see getopt_long, see getting started with Gengetopt, see gnulib, see gnulib, see group options, see H hidden, see how to use Gengetopt, see I include, see initialize, see installation, see invoking, see K Known Bugs, see L libtool, see Limits, see long, see long option, defined, see M mailing list, see Misfeatures, see multiple, see multiple option, defined, see multiple options, see multiple parsers, see O on/off, see option without name, see option, defined, see optional, see override, see P package, see parameter, see parameter, defined, see parameters, see parser parameters, see patching, see purpose, see R required, see required option, defined, see requirements, see S section, see short, see short option, defined, see string parsers, see T Terminology, see text, see tutorial, see typestr, see U usage, see V value, defined, see values, see version, see W Who should use Gengetopt, see wrapping, see